Use - Miele Compact C1 Mode D'emploi

– Turbobrush
These vacuum cleaners are supplied
with separate operating instructions for
the relevant accessory part.
Reversible floorhead (Fig. 17)
(included as standard depending on
model)
For general use and also for vacuuming
the stairs.

For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.
Parquet floorbrush (SBB Parquet-3)
(included as standard depending on
model)
This brush has natural bristles and is
designed for use on smooth floors that
are susceptible to scratching.

Use

Unwinding the cord (Fig. 18)
 Pull the power cord out to the re-
quired length (max. cord length ap-
prox. 18" (5.5 m).
 Insert the plug into the socket.

If vacuuming for longer than 30
minutes, the cord must be pulled out
all the way. Danger of overheating
and damage.
Rewinding the power cord (Fig. 19)
 Turn off at the wall socket and un-
plug.
 Press the rewind foot control. The
cord will rewind automatically.
Turning the vacuum cleaner on and
off (Fig. 20)
 Press the On/Off foot control .
Regulating the suction power
(Fig. 21)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to maneu-
ver the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
 Curtains, fabrics
 Upholstery, cushions
 Deep pile carpets, rugs and run-
ners
 Energy-saving normal vacuuming
with low noise
 Low pile carpet and rugs
 Hard flooring and heavily soiled
carpets and rugs
When using the adjustable floorhead,
if the suction seems too high, reduce
the suction until the floorhead is eas-
ier to maneuver.
 Turn the suction power selector man-
ually to the suction power setting you
require.
en-US
15