-
Assemble the bottom spacer.
-
Assemble the top plate to join the cabinets.
-
Assemble the middle adjusting profile.
-
Assemble the top grid between the cabinets.
Multiplexing instruction island Genius panoramic with one header (FIG. 20)
-
Align the multidecks and level them by adjusting the feet.
-
Assemble the profile of the top decoration trim in the header cabinet, as per Ref. No. 1.
-
Join the cabinets under the bumper rail, as per Ref. No. 2.
-
Assemble the top canopy as per Ref. No. 3.
-
Remove the back panel (Ref. No. 4) and screw the screws in the uprights as per Ref. No. 5.
-
Assemble the top grid between the cabinets, as per Ref. No. 6.
Multiplexing instruction island Genius panoramic with one header (FIG. 21)
-
Align the multidecks and level them by adjusting the feet.
-
Assemble the bottom spacer, item no. 670954.
-
Assemble the top plate to join the cabinets, item no. 670962.
-
Assemble the bottom plate to the middle adjusting profile (code no. 670950 for Genius H125 and no. 670951 for
Genius H145) and screw them under the bottom part of the basin.
-
Assemble the handrail, item no. 670964.
-
Assemble the bumper rail holder and the bumper rail, item no. 670965.
-
Assemble the top grid between the cabinets.
18 - Wiring diagrams
The wiring diagram can be seen on FIG.22.
Legend:
AP = Output 230V
CA = Main power supply cable
CE = Electronic control
CS = Connecting cable
D = Defrosting heating element (Optional)
IG = Main switch
IL = Light switch
K1, K2, K3 = Relay
L = Phase
LV = Display case lights
M = Motor
N = Neuter
PC = Control panel
QE = Control board
SS = Defrost probe
ST = Temperature probe
Vm = Fan motor
Vv = Display case fan
19 - Instructions for the defrosts synchronization of multiplexed cabinets with instrument EVZ000
Please refer to the explanation at page 11. The connecting cable is supplied in the multiplexing kit.
20 - Conformity Declaration
A copy of the declaration of product conformity can be requested by filling in the form available a the internet address:
http://www.oscartielle.it/conformity
24