Blaupunkt BLP3820 Mode D'emploi page 11

Specifications
Rated voltage : DC 5V 0,5A
Max consumption : 5W
Li-ion battery 600mAh
Radio frequency : 2,4GHz
Sound power : 5W
Frequency range : 60Hz-18KHz
Bluetooth compatible version : 4.2
Distance Bluetooth stays connected : 10m
Music playing time : 3-4 hours
Charging time : 3 hours
Audio format supported : MP3, WAV, WMA, FLAC, APE
Dimensions : 7 x 7 x 10,5cm
Weight : 280g
Bluetooth connection (pairing)
Long press "ON/OFF" button on the bottom, blue light will begin to flash. Activate Bluetooth function on
your phone and search for Bluetooth devices, select "BLP3820" from the list to connect.
If the pairing is successful, colorful LED light will flash alternately.
Re-connect :
BLP3820 will attempt to reconnect the last paired device automatically. If BLP3820 fails to reconnect
automatically, please check Bluetooth setting on your phone and reconnect manually.
Bluetooth play
Short press Play / Pause button to play music automatically. Short press again to pause. Long press this
button will disconnect Bluetooth, and enter into LINE IN MODE.
Plug a 3.5mm connector of the charging cable into your phone or computer, plug micro USB into BLP3820
speaker, then BLP3820 can play music from your mobile phone, MP3 or computer through audio cable.
Short press + button for the next song, long press for volume up.
Short press – button for the previous song, long press for volume down.
Under Bluetooth mode, when a call comes in, tap phone button to answer / hang up the call. Long press
this button to call the last phone number.
Tap lamp button to change LED color or turn off the LED light.
Charge
Before first use, please fully charge the battery.
When power is low, the speaker will give a warning tone to remind you to charge.