Cycles, Options And Lights - Amana ADB-2 Guide D'utilisation Et D'entretien

Cycles, Options and Lights

Cycles
Choose the cycle that best describes your dishload by pressing the corresponding touchpad. (See page 3,
Operating Tips, for how to begin the cycle).
CYCLE
Heavy Wash
Normal Wash
Quick Wash
Auto Wash
(select models)
Rinse Only
(select models)
* Number of fills will vary depending on the soil level of each load.
Notes
• Depending on inital water temperature, time may be added to the cycle to reach the proper temperature.
• Cycle times shown in the numerical display (select models) will increase or decrease, based on each load's soil
level, water temperature and selected options.
• Only the following certified cycles have been designed to meet NSF requirements (NSF/ANSI 184 Residential
Dishwasher) for sanitization: Auto Wash (select models), Heavy Wash, Normal Wash and Quick Wash.
DESCRIPTION
Long cycle for heavy food soils.
Medium cycle for average food
soils. The turbidity sensor is
active with this cycle.
Short cycle for light food soils.
Designed to select the number
of water fills best suited for the
soil level of each load. The
turbidity sensor is active with
this cycle.
Rinses dishes being held until
there is a full load.
TIME
(APPROX.
MINUTES)
132
97-117
82
94-128
9
7
NUMBER OF
WASHES/RINSES
2 washes/3 rinses
1-2 washes*/1-2 rinses*
1 wash/2 rinses
1-2 washes*/2-3 rinses*
1 rinse