Removing The Upper Rack; Important - Amana ADB-2 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Loading
The Folding Tines (select
models) located in the front
right corner provide
convenient loading space for
large, bulky items like pots
and pans or mixing bowls.
To lower tines, carefully push the tines out of each
holder toward the center of the rack and lay the tines
down.
Utensil Baskets
Removable Door Utensil Baskets
For best cleaning results,
prevent items from nesting
together by placing some items
in the basket with handles up
and some with handles down.
Load knives handles up and
spoons and forks handles down.
To remove the basket(s) from
the door:
1. Grasp the utensil
basket by the handle.
Slide it toward the top
of the door.
2. Lift the basket off the
securing knobs.
To replace the
basket(s) in the door:
1. Align the slots on the
backside of the utensil
basket with knobs on
the door.
2. Set the utensil basket on the securing knobs.
3. Slide the basket toward the bottom of the door until
it locks into place.
Auxiliary Basket (select models)
Use this supplemental
basket in the upper rack
for loading miscellaneous
items and utensils. This is
also a safe place to load
sharp knives and pointed
items.

Removing the Upper Rack

The upper rack can be removed when tall or oversized
items need to be loaded into the lower rack. Unload
the rack before removing it from the dishwasher.
To remove rack with tab-lock rack stops :
1. Roll the rack
2. Locate the rack stops at the end of each track.
Squeeze the tab in the middle of the rack stop and
pull the rack stop straight out. Take care to support
the rack while removing the rack stops.
3. Roll the rack all
the way out of
the track and
remove from
the dishwasher.
To replace:
1. Replace the
dishwasher rack by guiding the
wheels into the tracks.
2. Push each rack stop squarely into the end of the
track until the catch pops into the small hole on the
side of the track.

Important:

The dishwasher will not
operate correctly if the
Securing Knobs
wash arm is not aligned
with one of the water inlet
holes on back wall of the
dishwasher.
5
to
of the way out.
1
1
3
2
Tab Lock
Style may vary by model
Tab Lock
Rack Stop

Publicité

Table des Matières
loading

Table des Matières