Preparation; Recirculation - ETNA AO560WIT Mode D'emploi

INSTALLATION

Preparation

Recirculation

The exhaust-air pipe can be mounted to the top or the rear of the
cooker hood. Close the opening you will not be using with the supplied
lid (B). Remove the lid (A) if the exhaust-air pipe is to be connected to
the rear of the hood. Connect the exhaust-air pipe to the flange (D).
Turn air distribution lever (C) on the motor housing to the 'recirculation'
position if the cooker hood is used in the recirculation-air mode.
1
3
2
EN 11