Ayce JF01C-P1W10-BZH Manuel D'utilisation page 8

Read this manual carefully before using this product and check whether there are any damaged
parts. The product cannot be installed in case of damages. Keep this manual for further reference.
SAFETY WARNINGS:
a) Keep this product out of reach of children and unauthorized users.
b) Unplug before any maintenance and let it cool down before any cleaning work.
c) Before first connecting the appliance ensure that the voltage indicated on the rating label
corresponds with the main voltage of your home.
d) Before using the device make sure that all screws have been tightened.
e) Do not use the floodlight without a correctly installed safety glass.
f) Do not use the product when it is charging; this could damage the product.
g) The glass will become very hot after long time use, do not touch it.
h) Do not look into the light directly.
i) If any part of the product is broken, do not use or charge it, the product must be destroyed.
j) The LED cannot be replaced.
k) Do not leave the product unattended during charging and working.
l) The manufacturer is not responsible for any damage to property or persons in the event of
incorrect use of the appliance.
m) If the power cable is damaged, it must be replaced by the manufacturer, it's after sales service
or similarly qualified persons in order to avoid a hazard.
n) If the glass is broken, replace it immediately.
0) Minimum distance from lighted objects 1 m.
EXPLANATION OF SYMBOLS:
Conforms to relevant European requirements for the product.
The crossed-out wheeled bin symbol indicates that the item should be disposed of
separately from household waste. The item should be handed in for recycling in
accordance with local environmental regulations for waste disposal. By separating a
marked item from household waste, you will help reduce the volume of waste sent to
incinerators or land-fills and minimize any potential negative impact on human health
and the environment.
TECHINICAL DATA:
Battery operated LED projector
Type JF01C-P1W10-BZH
Rated voltage 8,4 V
Rated power
10 W
IP Level
IP20
Lamp 1x10 W LED, 6500 Kelvin, 750 Lumen
Charging time
4 Hours
Working time
4 Hours
Input:100 V - 240 V ~,
230V main supply
charger
Output: 8,4 V
Input: 12 V
Car charger
Output: 12 V
1,1 kg
Weight
18,5 x 16,5 x 25,5 cm
Dimension
Dimension of
110 x 82 x 4 mm
protective glass
CLEANING:
Turn off the power to clean the lamp and let the lamp cool down. Clean the lamp with soft
cloth (if necessary slightly moistened). Never use alcohol or a similar solvent, this could
damage the lamp.
INSTALLATION:
13
(JF01C-P1W10M-BZH44)
CHARGING THE BATTERY:
I
14 GB