Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EXTERIOR-MOUNTED VENT MOTOR
KIRD and YKIRD Models Only
IMPORTANT: Exterior blower Model No. KPEU722M [1200 cfm
3
(34.0 m
/3)] cannot be used with this retractable downdraft vent
system.
NOTE: Exterior-mounted vent motor installations require exterior
blower system, Model No. KPEC992M [900 cfm (25.5 m
available from your dealer or authorized parts supplier.
Venting Methods
Determine which venting method is best for your application.
Vent system can terminate through either the wall or roof.
Island location
Built-in cabinet locations
A
B
A. Left venting
°
B. 10" round 90
elbow
INSTALLATION INSTRUCTIONS
3
/m)],
A
B
A. Right venting
°
B. 10" round 90
elbow
Roof Venting
A. 10" (25.4 cm) round vent
Calculating Vent System Length
It is recommended that you use round vent instead of rectangular
vent, especially if elbows are required. If rectangular vent is
required, it should be transitioned to 10" (25.4 cm) round vent as
soon as possible.
Maximum Length of Vent System
Vent
10" (25.4 cm) round
To calculate the length of the system you need, add the
equivalent feet (meters) for each vent piece used in the system.
Vent Piece
45° elbow
90° elbow
A
Length
40 ft (12.2 m)
10" (25.4 cm) Round
2.5 ft
(0.8 m)
5.0 ft
(1.5 m)
15
Publicité
Table des Matières
