Table des Matières

Publicité

60
E

CHECKING THE BATTERIES

When the card check is complete, the remaining battery
power is displayed on the control panel.
Display
lights and turns off
automatically.
blinks and other
indicators on the control
panel are displayed
normally.
blinks and other
indicators on the control
panel go out.
Note:
When taking pictures on a special occasion, on a
trip, or in cold temperatures, keep spare batteries
handy or use nickel metal hydride batteries.
If you do not operate the camera for three
minutes, the camera will be set to the stand-by
mode. After four hours in the stand-by mode, the
power turns off automatically. (Time varies
depending on the type of batteries used.)
To turn on again, close and open the lens barrier.
Meaning
Batteries are OK.
You can shoot.
Battery power is low and
batteries should be
replaced.
Batteries are dead and
should be replaced
immediately.

Publicité

Table des Matières
loading

Table des Matières