GE Profile DPVH890GJ0WW Manuel D'utilisation Et D'installation page 48

Before you call for service...
PROBLEM
Small amount of water
on floor in front of dryer
Water on floor in back
of dryer
Dryer makes water
noises
Water drips from door
when opened after
a Steam Cycle
Cannot see steam at
beginning of cycle
Garments still wrinkled
after steam cycle
Dryer continues to
tumble after display
says Complete
48
Possible Causes
Inadequate load size for steam
cycle selected, excess steam
condenses inside cabinet and
leaks out
Loose water hose connection to
valve
Hose missing rubber washer at
connection with valve
Water valve is open filling steam • This is normal.
generator
Steam generator is dispensing
steam into drum
Steam condenses on inner door
Steam released at different
time in cycle
Too many garments
Extend Tumble was selected
What To Do
• Select a shorter cycle. Manually reduce cycle time
for given cycle.
• Tighten connection.
• Install rubber washer provided with hose.
• This is normal.
• This is normal.
• This is normal.
• Load fewer garments; manually increase time.
• Ensure Extend Tumble option is not selected.