2/ Technical Data; 3/ Description; 4/ Installation - Selecline 600081547 Manuel D'utilisation

2/ TECHNICAL DATA

Model number
Protection class
Power supply
Power consumption
Storage volume
Net weight

3/ DESCRIPTION

1. Door racks
2. Door bottle rack
3. Adjustable feet
4. Freezer drawers

4/ INSTALLATION

Warning! Disconnect the appliance from the wall outlet before you install the
appliance.
Unpack all parts
After unpacking, check for completeness of delivery and for shipping damage. If your delivery
is damaged or incomplete, please contact our after-sales service.
Choose an appropriate location
Warning!
Position the appliance so that it is not exposed to direct sunlight. This appliance
should not be used outdoors or exposed to rain.
Warning!
The appliance must be separated by a distance of at least 50 cm from heat sources
(such as stoves, ovens, radiators, etc.) and at least 5 cm from electric ovens.
Warning!
Install the appliance in a place where the power plug is easily accessible for power
disconnection.
1. Place the refrigerator in a well ventilated room on a dry, stable and level surface, away from
direct sunlight and other heat sources.
2. Ensure sufficient air circulation at the rear of the appliance. Do not place the appliance
against a wall to avoid noise caused by vibration. Make sure that the air can still circulate
freely around the appliance. Insufficient ventilation would result in malfunction and
increased energy consumption. Leave a space of at least 10 cm between the refrigerator
and the wall, and at least 30 cm between the top of the refrigerator and the ceiling.
3. Leave enough space to access and open the door easily. If necessary, change the direction
of door opening as described below.
600081547/ HD-221REN(SN)
Class I
220 - 240 V~, 50 Hz
240kWh/a
170 L
37.5 kg
5. Ice-making drawer
6. Fruit and vegetable
drawer
7. De-icing drain outlet
9
8. Refrigerator shelves
9. Thermostat
10. Light
EN