Selecline 600081547 Manuel D'utilisation page 10

Level feet
If the refrigerator tilts in some way, adjust the height of the left/right foot (3) of the refrigerator
EN
to be in a horizontal level.
Note: If the appliance is not level, the door and the door seal will not be closed properly.
1. Turn the foot (3) clockwise to raise the refrigerator.
2. Turn the foot (3) counter clockwise to lower the refrigerator.
Reverse Door
Ensure the unit is unplugged and empty. To take the door off, it is necessary to tilt the unit
backwards. You should rest the unit on something solid so that it will not slip during the door
reversing process. All parts removed must be saved to do the reinstallation of the door. Do not
lay the unit flat as this may damage the coolant system. It is better that 2 people handle the
unit during assembly.
1. Remove the top hinge cover and the hole cover. While holding the refrigerator compartment
door against the appliance, unscrew the top hinge (
2. Carefully lift the refrigerator compartment door and place it on a soft surface to avoid
scratches. Remove the 2 hole covers. Unscrew and remove the intermediate hinge (
3. Remove the freezer compartment door. Tilt the appliance backwards. Remove the
2 height-adjustable front feet and then remove the lower hinge. Install the lower hinge and
adjustable feet assembly on the other side. Then, install the door pin and freezer door stop
on the other side (
4. Replace the freezer compartment door by pressing it against the appliance. Replace the
intermediate hinge and hole covers. Make sure that the door is flush with the appliance.
Remove the stop under the refrigerator compartment door and refit the stop supplied in
the accessory bag on the other side (
5. Replace the refrigerator compartment door on the intermediate hinge by pressing it
against the appliance. Make sure that the door is flush with the appliance. Replace the top
hinge, the top hinge cover and then replace the hole cover on the other side (
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance: This ensures the correct operation of the
appliance.
Fig. 3).
è
Fig. 4).
è
Fig. 1).
è
10
Fig. 2).
è
Fig. 5).
è