Selecline 600081547 Manuel D'utilisation page 17

THE COLDEST PART OF THE REFRIGERATOR
The symbol indicates the location of the coldest part of your refrigerator. This
area is in between the vegetable compartment at the bottom and the symbol at
the top, or the shelf at the same height. In order to maintain the temperature in
this area, make sure not to change the position of this shelf.
In pulsed air refrigerators (equipped with a fan) or No Frost models, the coldest area symbol is
not shown because the temperature is uniform throughout the interior.
INSTALLING THE TEMPERATURE INDICATOR
To help you adjust your refrigerator correctly, it is equipped with a temperature indicator that
you can use to control the average temperature in the coldest area.
WARNING: This indicator is only intended for use in your refrigerator. Do not use it in another
refrigerator (as the coldest area will not be the same) or for any other purpose.
TEMPERATURE INDICATOR: THE COLDEST PART OF YOUR REFRIGERATOR
CHECKING THE TEMPERATURE IN THE COLDEST AREA
Using the temperature indicator, you should regularly check that the temperature is
correct in the coldest part of your refrigerator. The temperature inside your refrigerator
depends on a number of factors, such as the outside room temperature, how full your
refrigerator is, and how often you open the door. Take these factors into consideration when
adjusting your appliance.
When the indicator shows "OK", it means your thermostat is set properly and the temperature
inside your refrigerator is correct.
If the indicator is white it means the temperature is too high, so you should increase the
thermostat and wait for 12 hours before checking the indicator
again.
After loading the refrigerator or opening the door, the indicator may turn white for a few
seconds.
Correct setting Temperature too high – adjust the thermostat
17
EN