Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
13.3 Locking/unlocking the keyboard
To lock the keyboard:
•
make sure that no other procedure is in progress
•
press and hold down the DOWN and ON/STAND-BY keys for 1 sec: the display will show the
message "Loc" for 1 sec.
To unlock the keyboard:
•
press and hold down the DOWN and ON/STAND-BY keys for 1 sec: the display will show the
message "UnL" for 1 sec.
13.4 Silencing the Buzzer (If available)
Press a key (the first pressing of the key will not cause the effect associated with that key)
ERRORS
CODE
Pr1
Pr2
When the problem that caused the alarm disappears, the instrument returns to normal
operation
ALARMS
CODE
Id
dFd
When the problem that caused the alarm disappears, the instrument returns to normal
function, except for dFd alarm which needs to push a button
FAILURE
Cell probe
error
Evaporator
probe error
Door microswitch input alarm
(only for uprights)
Defrosting alarm switched off
because maximum time has
been reached
FAILURE SOLUTION
•
Verify that the probe is intact
•
Check the cell temperature
•
Verify that the probe is intact
•
Check the cell temperature
Close the door
Contact Servicing
FAILURE SOLUTION
15
Publicité
Table des Matières
