SEVERIN KGK 8941 Mode D'emploi page 29

c) Put the door jack and the cable connection
in the opening on the door and then attach
the small end cap.
d) Loosen 2 screws as shown in the figure
below, in order to remove the gap caver on
the top side of the appliance. Remove the
small end cap cover on the door and take
out the door socket and the cable connec-
tion.
e) Put the door socket in the round opening
on the door and attach the small end cap
cover.
f) Raise the refrigerator door about 50 mm, in
order to remove it from the appliance.
a) Loosen the 3 screws that hold the middle
hinge and then remove it.
b) Raise the freezer door about 50 mm, so
you can remove it from the fridge.
- 29 -
Step 2