SEVERIN KGK 8941 Mode D'emploi page 24

Installation measures
If the appliance is placed sideways on a wall,
you will leave a lateral gap of at least 60 mm,
so that the doors of the appliance can open
in a 90-degree angle. In order to be able to
remove the VeggiBox and the ZeroBox com-
pletely from the appliance, detach the bottle
compartment if necessary.
KGK 8941 | 8942
Width (W) Depth (D)
595 mm
A B
1010 mm 1230 mm
KGK 8945 | 8946
Width (W) Depth (D)
595 mm
A B
1017 mm 1237 mm
Height (H)
642 mm 1855 mm
C E
125° 30 mm 300 mm
Height (H)
635 mm 2000 mm
C E
125° 30 mm 300 mm
Ventilation
The air warmed behind the appliance needs
to circulate freely. For this reason, the circula-
tion of air cannot be compromised.
Caution! Do not cover possible existing
ventilation openings in the back area of the
top cover plate!
Connection
• Before you connect the appliance, you have
to make sure that itself and the power plug
do not show any transport damages.
• Connect the appliance only to a shockproof
outlet. The mains voltage has to correspond
to the one stated on the tool identification
plate.
• The appliance complies with the guidelines
that are obligatory for CE marking.
• Do not connect the appliance to an inverter
• The power plug should not touch the back-
side, in order to avoid possible vibration
noise.
• The appliance can be put into operation by
plugging the mains plug into the point. Af-
ter this, the display lights up for 2 seconds,
and the appliance operates in 'ECO'-mode.
• A complete switching-off only occurs by
pulling the mains plug.
F
F
- 24 -