General Safety Rules; Functional Description - Bosch DAF220 Notice Originale

daf220_bu_2609140572_003.fm Seite 6 Montag, 8. September 2008 2:22 14
6 |

General Safety Rules

WARNING! Read all
instructions. Failure to
follow all instructions
listed below may result
in electric shock, fire
and/or serious injury.
Safety Rules for
Anglefinders
When using the angle informa-
tion provided by this tool to cut
materials, always observe all of
your saw's instructions, includ-
ing those for positioning and
clamping the workpiece. In
some cases, it may not be pos-
sible to set the required angles
on a particular saw or type of
saw, and an alternative means
of performing the cut will need
to be used.
For extremely acute (sharp)
angles, it may be necessary to
make the cut using a taper jig
with a table saw or circular
saw.

Functional Description

Intended Use
The Bosch DAF220 Miterfinder™ is
a versatile angle measuring tool de-
signed for the following uses:
– Anglefinder – Precisely mea-
sures the exact angle of existing
structure or workpiece.
– Protractor – Precisely positions
the workpiece or intended cut
line at the desired angle
– Miter Cut Calculator – Deter-
mines the exact miter setting
needed for simple miter cuts
2 609 140 572 | (8.9.08) Bosch Power Tools