afx light MINI-BEAMWASH Manuel D'utilisation page 6

SENS (SOUND SENSE MODE )
0 is for off , 100 is for the strongest of sense .
BLACKOUT MODE
T o select Blnd, press the ENTER button to show the BALCKOUT MODE on the display. Use the DOWN/UP button
to select Yes (blackout) or No (normal) mode. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
LED DISPLAY ( to switch off the display during use )
T o select Led, press the ENTER button to show the LED DISPLAY on the display. Use the DOWN/UP button to
select the On (LED on) or Off (LED off) mode. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
DISPLAY INVERSE
T o select Disp, press the ENTER button to show the DISPLAY on the display. Use the DOWN/UP button to
select No (normal) or Yes (inversion), press ENTER button to setup. Back to the functions without any
change press MENU button.
PAN INVERSE
T o select Pan, Press the ENTER button to show the PAN INVERSE on the display. Use the DOWN/UP button to
select the Yes (PAN inversion) or No (normal) mode. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
TILT INVERSE
T o select Til, Press the ENTER button to show the TIL INVERSE on the display. Use the DOWN/UP button to select
the Yes (tilt inversion) or No (normal) mode. Once the mode has been selected, press the ENTER button to setup, to
go back to the functions without any changes press the MENU button again. Hold and press the MENU button for
one second or wait for one minute to exit the menu mode.
AUTO TEST
T o select Test, press the ENTER button to show the TEST on the display and the unit will run a self‐test . T o go back
to the functions without any changes press the MENU button again. Hold and press the MENU button for one
second or wait for one minute to exit the menu mode.
© Copyright LOTRONIC 2015 MINI-BEAMWASH Page 6