Slave Mode; Sound Mode - afx light MINI-BEAMWASH Manuel D'utilisation

16 RSET Restore factory settings
DMX 512 ADDRESS
T o select Addr, press the ENTER button to show the DMX ADDRESS on the display. Use the DOWN/UP button to
adjust the address from 1 to 512. Once the address has been selected, press the ENTER button to setup, to go
back to the functions without any changes press the MENU button again. Hold and press the MENU button for one
second or wait for one minute to exit the menu mode.
CHANNEL MODE
To select Chnd, press the ENTER button to show the DMX CHANNEL MODE on the display.
Use the DOWN/UP button to select the , 10/36channel modes. Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any changes press the MENU button again. Hold and
press the MENU button for one second or wait for one minute to exit the menu mode.

SLAVE MODE

T o select Slnd, press the ENTER button to show the SLAVE MODE on the display. Use the DOWN/UP button to
select Mast (MASTER),Sl (SLAVE ) modes. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any changes press the MENU button again. Hold and press the MENU
button for one second or wait for one minute to exit the menu mode.
SHOW MODE
T o select the Shnd , press the ENTER button to show the SHOW MODE on the display. Use the
DOWN/UP button to select speed of the auto mode . Sp 0 (slow speed), Sp 1 (speed 1) or ... or S p 9 (high speed) .
Once the mode has been selected, press the ENTER button to setup, to go back to the functions without any
changes press the MENU button again. Hold and press the MENU button for one second or wait for one minute to
exit the menu mode.
You can also select the Sound mode

SOUND MODE

T o select Soun, press the ENTER button to show the SOUND MODE on the display. Use the DOWN/UP button to
select On (sound on) or Off (sound off) mode. Once the mode has been selected, press the ENTER button to setup,
to go back to the functions without any changes press the MENU button again. Hold and press the MENU button for
one second or wait for one minute to exit the menu mode.
© Copyright LOTRONIC 2015
.=YES
.=NO
MINI-BEAMWASH Page 5