Using The Memory Card - Sony PlayStation Manuel D'utilisation

12
A
1
2
3
B
Directional buttons ® button
Touches directionnelles Touche ®
Botones de dirección ® botón
4 5 6 7
MEMORY CARD 1 MEMORY CARD 2
EN

Using the Memory Card

You can save and load game data by using the
optional SCPH-1020 Memory Card (sold
separately). You can also copy data from one
Memory Card to another or delete unnecessary
data.
Each Memory Card has 15 memory blocks, and
you cannot save game data which requires
more blocks than there are empty blocks on
your Memory Card.
Before playing, check how many blocks are
necessary for your game.
8
Refer to the instruction manual of the individual game for
necessary numbers of memory blocks.
Set the supplied Analog Controller to digital
mode (LED: Off).
To start Memory Card operation
1
Turn on the power without inserting a
......
disc.
2
Insert Memory Card.
....
9
3
Select "MEMORY CARD" with the
....
directional buttons and press the ®
button.
To cancel the Memory Card operation
Select "EXIT " on the screen with the
directional buttons and press ®.
A Memory Card screen
1 Contents of card 1. The game data is
displayed as icons.
2 Icons. The number of icons shows the
number of the used memory blocks.
3 Move with the directional buttons to select
the icon.
4 Copy the game data on the card.
5 Copy entire game data on the card.
6 Delete unnecessary game data.
7 Exit from the Memory Card operation.
8 Contents of card 2
9 Name of the game data
B Memory Card operation
How to use the Controller for the Memory
Card screen
• To move the arrow: Press the directional
button.
• To select the items: Press ®.
• You can also operate with the optional
SCPH-1090 Mouse.
To copy a part of the game data
1
... Check that the card has enough memory
blocks, then select "COPY".
2
... Select the card that has the data to be
copied.
3
... Select the icon of the data to be copied.
4
... When the message "Are you sure ?"
appears select "YES".
To cancel copying, select "NO".
Notes
• You cannot copy the data to a card that does not have
enough empty memory blocks. You may need to delete
unnecessary data.
• Do not remove the card until the icons stop moving.
To copy all the game data
1
... Check that the card has enough memory
block, then select "COPY ALL".
2
... Select the card to be copied .
3
... When the message "Are you sure ?"
appears select "YES".
To cancel copying, select "NO".
Notes
• Do not remove the card until icons stop moving.
• If the data you are trying to copy already exists on the
card you are trying to copy to, the data will not be
copied.
To delete the game data
1
... Select "DELETE".
2
... Select the card that has the data you want
to delete.
3
... Select the icon of the game data you want
to delete.
4
... When the message "Are you sure ?"
appears select "YES".
To cancel deleting, select "NO".