Hitachi WH 12DM2 Instructions De Sécurité Et Mode D'emploi page 35

9. 1/2" (12.7 mm) Square adaptor: (WR9DM2)
This is used when using a socket with square hole dimensions of 1/2" (12.7 mm).
Code No.
996145
10. Bit adaptor: (WR12DM2)
This is used for tightening small screws (M6).
NOTE: This adaptor is set only on the anvil (drive angle) of the main unit.
Fig. 41
NOTE: Specifications are subject to change without any obligaiton on the part of the
HITACHI.
B
Fig. 40
Dimention B
1/2" (12.7 mm)
Code No.
S
322752
S
Dimention S
3/8" (9.5 mm)
Dimention S
1/2" (12.7 mm)
English
35