Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FRONT PANEL
Power LED
ON/OFF/
Switch
•
ON/OFF Switch — This switch controls AC output of the inverter.
•
Power LED (Green) — When this green LED is lit, the inverter is operating
normally.
•
Ground Fault LED (Yellow) — When the yellow LED is lit, the ground fault
circuit has been activated. Shut down the inverter and restart.
•
Fault LED (Red) — The RED indicator turns on as the inverter shuts down due
to overheating, overload, under voltage, or over voltage.
Immediately turn off all AC appliances if the FAULT LED is lit. Allow the
ƒ
inverter to cool before continuing. Make sure that the ventilation vents
are not blocked.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
Ground Fault LED
2.1A
USB Port
©2018 Wagan Corporation. All Rights Reserved.
Fault LED
Two 115V
AC Outlets
4
Publicité
Table des Matières
