Front Panel - Wagan Tech PURE LINE 700 Guide D'utilisation

FRONT PANEL

ON/OFF
Switch
• ON/OFF Switch — This switch controls AC output of the inverter.
• Power LED (Green) — When this green LED is lit, the inverter is operating
normally.
• GFCI LED (Yellow) — When the yellow LED is lit, the ground fault circuit has
been interrupted. Shut down the inverter and restart.
• Fault LED (Red) — The RED indicator turns on as the inverter shuts down due
to overheating, overload, under voltage, or over voltage.
Immediately turn off all AC appliances if the FAULT LED is lit. Allow the
ƒ
inverter to cool before continuing. Make sure that the ventilation vents
are not blocked.
If an inverter shutdown was preceded by a buzzing sound, there may
ƒ
be an excessive load in combination with a low voltage or cable
problem.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
Power LED
Remote ON/OFF
Switch Connection
©2017 Wagan Corporation. All Rights Reserved.
GFCI LED
Fault LED
2.1A Two 115V
USB Port AC Outlets
4