Table des Matières
Publicité
5.0 AT Command Line Interface
La description
Lire / Liste IP pare-feu
Syntaxe de la commande
AT+MFIP[=<Name>[,<Operation>[,<Action>,<Source>,<IP Address>[,<Prefix>]]]]
Paramètres
Name: Name of firewall IP list name, 1 - 64 characters
Operation: ADD - Add a firewall IP list
Action: 0 - Accept
Source: 0 - LAN
Source IP: Valid IP address
Prefix: 0 ~ 32. 32 (default) - single IP address
Usage:
AT+MFIP
AT+MFIP=<Name>
AT+MFIP=<Name>,DEL
AT+MFIP=<Name>,ADD,<Action>,<Source>,<IP Address>[,<Prefix>]
AT+MFIP=<Name>,EDIT,<Action>,<Source>,<IP Address>[,<Prefix>]
Exemple
Commander:
AT+MFIP=iplist1,add,0,2,184.71.46.138,32<enter>
Réponse:
OK
Commander:
AT+MFIP?
Réponse:
Name: ip1
Action: ACCEPT
Source: WAN
Source IP: 184.71.46.126
Prefix: 32
Name: iplist1
Action: ACCEPT
Source: WAN
Source IP: 184.71.46.138
Prefix: 32
OK
© Microhard 2016
EDIT - Edit a firewall IP list
DEL - Delete a firewall IP list
1 - Drop
2 - Reject
1 - Independent LAN
2 - WAN
3 - Carrier
4 - WIFI
AT+MFIP
184
Publicité
Table des Matières
