Table des Matières
Publicité
5.0 AT Command Line Interface
La description
Get / Régler l'interface LAN du réseau: Spanning
Tree (STP)
Exemple
Commander:
AT+MNLANSTP=lan,0<enter>
Réponse:
OK
La description
Get / Régler l'interface LAN de réseau: DNS
Exemple
Commander:
AT+MNLANDNS=lan,0<enter>
Réponse:
OK
© Microhard 2016
Syntaxe de la commande(Effet: AT&W)
AT+MNLANSTP=<LAN Name>[,<STP>]
Paramètres:
LAN Name: Name of Network LAN interface
Spanning Tree: 0 - Off
1 - On
AT+MNLANDNS
Syntaxe de la commande(Effet: AT&W)
AT+MNLANDNS=<LAN Name>[,<Mode>
[,<Primary DNS>,<Secondary DNS>]]
Usage:
AT+MNLANDNS=<LAN Name>
AT+MNLANDNS=<LAN Name>,<Mode>
Where <Mode>=0
AT+MNLANDNS=<LAN Name>,<Mode>
[,<Primary DNS>,<Secondary DNS>] Where
<Mode>=1
Paramètres:
LAN Name: Nom de l'interface LAN Réseau
Mode: 0 - Auto
1 - Manual
Primary DNS: Valid IP Address or 0 (Reset)
Secondary DNS: Valid IP address or 0 (Reset)
AT+MNLANSTP
173
Publicité
Table des Matières
