Domo DO952T Mode D'emploi page 32

Masquer les pouces Voir aussi pour DO952T:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
DO952T-DO953T-DO956T
USE
1. Before you use the appliance for the first time, remove all stickers and labels and
clean the outside of the toaster with a damp cloth. Use the toaster for the first time
without any bread in it. Press down the breadlift and put the browning control to
the maximum position. This way you will burn existing dust that has fallen into
the toaster during production or transport. During this first use small smoke and
odeur development is possible.
2. For toasting bread, plug in the toaster. Choose the desired browning degree en put
the bread in the slot. Press down the breadlift until it clicks. The heating element
is now activated. The bread will be centered automatically for even toasting.
Precise browning positions are hard to recommend, since this depends a lot on a
persons taste.
3. The toasted bread will pop up automatically when the toasting time has passed.
4. The stop button can be used to cancel the toasting at any time.
5. Your toaster also has a defrost button. When you want to toast frozen bread,
press the defrost button. The defrost button will light up. When the bread is
toasted, it will again pop up automatically and the light next to the defrost button
will go out.
6. When you want to reheat bread that has already been toasted, you can use the
reheat button. Place the bread that you want to reheat into the slot. Press down
the breadlift and then press the reheat button. The reheat button will light up. The
bread will again pop up automatically. Changes in the browning control will not
alter the reheating time.
CLEANING OF THE TOASTER AND THE CRUMB TRAY
Remove the plug from the outlet before cleaning the appliance.
Whipe the outside of the toaster with a damp cloth and dry thoroughly. Do not use
any abrasive cleaners.
Do not use a fork or any sharp, metal objects to clean the inside of the toaster.
This may damage the heating elements.
Before cleaning the crumb tray, remove the plug from the socket and wait for the
toaster to cool down. Then open the crumb tray by pressing the tray and sliding
the tray out of the toaster. Clean the crumb tray with a damp cloth. Always dry the
tray thoroughly before replacing it into the toaster.
32

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Do953tDo956t

Table des Matières