Changing The Default Settings - Denon Professional DN-V200 Mode D'emploi

ENGLISH

8 CHANGING THE DEFAULT SETTINGS

2 Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
1 1
Turn on the power.
1
• Press the POWER button, the power indicator lights and the power
turns on.
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE:
• For some menus, the initial values can be changed during playback.
VIDEO SETUP
Use this to set the DN-V200/DN-V300's screen mode. (TV aspect and
TV type.)
AUDIO SETUP
Use this to set the DN-V200/DN-V300's audio output mode.
2
(Digital and LPCM output settings.)
DISC SETUP
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the discs default language
is set.
SYSTEM SETUP
On-screen display language setting: The initial settings screen's language
setting, etc., the viewing restriction level and playback of adult DVDs you
do not want children, etc., to see can be restricted. The number of initial
setting items can be increased.
Use the and
0
• Select "VIDEO SETUP" (see page 22, 23).
• Select "AUDIO SETUP" (see page 24, 25).
3
• Select "DISC SETUP" (see page 26~28).
• Select "SYSTEM SETUP" (see page 29~31).
To exit the setup mode
Press the RETURN or SETUP button.
20
cursor buttons to select the desired setting item.
1
RC-963
TOP MENU
/PBC
3
ENTER
ANGLE
DISPLAY STOP STILL /PAUSE
SLOW/SEARCH
SETUP NTSC/PAL ZOOM SLIDE SHOW
2
Main unit
Remote control unit
VIDEO SETUP
TV ASPECT
TV TYPE
VIDEO MODE
SLIDE SHOW
SELECT SET ENT E R BUTTON
SET TV ASPECT
For the display of items marked "
21.
Remote control unit Remote control unit
MENU
RETURN
PLAY
SKIP
4 3 PS
MULTI
AUTO
5 SEC
", see page
ENTER