Denon Professional DN-V200 Mode D'emploi page 13

2 Sound output from the DN-V200/DN-V300's digital audio output connectors
In the case of bit stream output
Audio recording format
DVD video
In the case of PCM output
Audio recording format
DVD video Linear PCM
Video CD
Music CD 44.1 kHz / 16 bit Linear PCM
MP3 CD MP3 (MPEG-1 Audio Layer 3)
*1 Only 48 kHz/16 bit sources are output.
*2 When playing copyright-protected linear PCM DVDs, in consideration of copyrights, no digital signals are output for sources exceeding
48 kHz/16 bits. When playing such sources, either set to "96k>48k" or make analog connections.
• Linear PCM audio is a signal recording format used for music CDs.
While signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96kHz/24 bit, providing
higher sound quality than music CDs.
Dolby Digital Dolby Digital bitstream
DTS
MPEG Audio
Copy protection ON
48 kHz / 16 ~ 24 bit No output data (*1)
96 kHz / 16 ~ 24 bit No output data (*2)
MPEG 1
Settings
DIGITAL OUT
NORMAL
2 channels PCM
(48 kHz / 16 bit)
DTS bitstream DTS bitstream
2 channels PCM 2 channels PCM
(48 kHz / 16 bit) (48 kHz / 16 bit)
Settings
LPCM (44.1 kHz / 48 kHz)
OFF
Copy protection OFF
48 kHz / 16 ~ 24 bit PCM
96 kHz / 16 ~ 24 bit PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM
PCM
ON
48 kHz / 16 bit PCM
48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM
ENGLISH
13