Trigano Jardin 880110 Notice De Montage page 108

Start in the middle of a connecting plate so that the bolts are hidden by a
vertical post. Join the extremities of the metal sheet using the bolts and washers.
The screw heads must be on the inside and the nuts on the outside. Ensure
that all the bolt holes are used. It is very important for all the bolts to be
adequately tightened to ensure a solid join. To protect the liner, stick a protection
band (duct tape) over the screws on the inside of the pool.
IMPORTANT: Increase the stability and rigidity of the metal sheet by
temporarily placing the top metal profiles and the vertical posts (round
part) as you go along.
Fasten the 2464 covering plate supports to the round parts of the posts before
assembly.
On the lower part, fix the posts to their connecting plate using 2 screws; on the
upper part, fix the posts to their connecting plate with 2 loosely tightened screws.
Position the connecting plates (round part).
2168
2363
2366
0341
VARUNA-SAPHIR-CANYON Oval
0341
2464
2268
108
Inside
Sides
121510
M6 nut
0341
2268
Guide 880110-rev B
121000
M6 screw
121610
M6 washer
Exterior