Grease Filters; Carbon Filter; Light Bulbs - Pelgrim BSK950 Mode D'emploi

MAINTENANCE

Grease filters

Carbon filter

Light bulbs

GB 10
Removing the grease filters
Switch off the electricity! Remove the plug from the mains socket or
turn the switch in the meter cupboard to zero. Release the lock of the
fat filer and tilt the filter downwards.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filters
• Attach the carbon filters to the filter.
• Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Changing the light bulbs
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
B
1. Remove the light glass by lifting it upwards with a small screwdriver
or something similar.
C
2. Replace the globe with a new globe of the same wattage.
Warning! Follow package directions and do not touch new light
with bare hands.
3. Replace the light glass (clicks into position).
If the lights do not work, make sure that the lamps are fitted properly
into their housings before you call for technical assistance.