Grease Filters; Carbon Filter; Lighting - Pelgrim BSK1000 Mode D'emploi

MaINteNaNce

Grease filters

Carbon filter

Lighting

B
C
Removing the grease filters
Switch off the electricity! Remove the plug from the mains socket or
turn the switch in the meter cupboard to zero. Pull the grease filter
towards you and tilt it forwards and down.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filters.
2. Attach the carbon filters to the filter.
3. Replace the grease filters.
Note:
• S aturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• T he carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Changing the light bulbs
• Remove the lamp cover.
• Replace the halogen light bulb with a replacement bulb with a
maximum output power of 20 Watts.
• Re-close the lamp cover.
GB 9