Telefunken B55U546A Mode D'emploi page 49

This setting configures the power up mode preference. Last State and Standby options
Power Up Mode
are available.
Virtual Remote
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left or
CEC
Right button to enable or disable the feature.
CEC Auto Power
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
On to its input source automatically. Press Left or Right button to enable or disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier. You
Speakers
can use the remote control of the TV to control the volume of the audio device.
Press OK to open the Smart Remote menu screen. Using this screen you can discover and
Smart Remote
connect the remote controller devices to your TV wirelessly.
Installation Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
channel scan
Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations. Satellite: Searches and stores satellite stations.
(Retune)
Manual
This feature can be used for direct broadcast entry.
channel scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan network channels. Digital Cable: Searches for cable network channels.
Analogue fine
You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete
Satellite
satellites or Edit satellite settings on the list. Antenna installation: You can change satellite
Settings
anntenna settings and/or start a satellite scan.
Installation
Displays installation settings menu. Standby Search (Optional): Your TV will search for new
Settings
or missing channels while in standby. Any new found broadcasts will be shown.
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option
List is set to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed
Network
in the channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
English - 48 -