Reversing The Door - Nordcap VKG 511 Mode D'emploi

Reversing the door.

(Not all appliances have lock.)
1. Remove the lock pin using a
flat-headed screwdriver.
4. Tilt the top panel forwards to
remove it (it is secured in tree
places)
7. Remove the bottom hinge
using the hex key.
10. Refit the bottom hinge on
the opposite side.
2. Remove the lock housing.
5. Lay the appliance on its back
and remove the upper hinge,
using the hex key.
8. Move the door handle to the
opposite side.
11. Move the palstic door guard
to the opposite side.
7
3. Loosen the top panel. Do not
remove the screws, just loosen
them.
6. Pull the torsion spring out
of the door together with the
hinge.
9. Move the hinge pin to the op-
posite side of the bottom hinge.
12. Insert the hinge pin and
tosion spring into the the top of
the door on the opposite side.
GB