IKRA GMEB 800 S Gartenmeister Mode D'emploi page 16

CONTENT
Names of the parts
Illustrations
Pictogram illustration and explanation
Intended use
Before starting up
Technical specifications
General safety information
Safety instructions for Electric-Tiller
Assembly
Starting
Transport
Maintenance and storage
Repair Service
Troubleshooting
Spare parts
Waste disposal and environmental protection
Warranty
Declaration of Conformity
Service
Intended use
This tool is only intended as an electric tiller for use in domestic and hobby gardens.
It is not designed for use in public areas, parks, sports facilities, or in agriculture and forestry.
The device is intended for breaking up pre-loosened, cloddy soil. It also allows peat, fertiliser. and compost to be
worked into the soil. The device is not suitable for breaking up firm soils and lawns!
Using the appliance for any other purpose is considered incorrect and unapproved. The manufacturer is not liable for
any damage or injury resulting from such use. The user is entirely responsible for any associated risks.
Double insulation
The appliance has double insulation. This means that all external metal parts are insulated from the electrical supply.
This is achieved by introducing an insulation layer between electrical and mechanical parts. The double insulation
guarantees you the greatest possible safety.
Overheat protection
The appliance is equipped with a mechanical overload protection sytem. In case the appliance is blocked by a foreign
object, the connection of the motor with the tine shaft will be cut off automatically.
• Switch off the motor,
• Remove the blockage. Replace tines if necessary before re-start.
GB | Operating Instructions
GB-1
Translation of the original Operating Instructions
Page
1 - 2
3 - 5
6 - 7
GB-1
GB-1
GB-2
GB-2
GB-2
GB-4
GB-4
GB-4
GB-4
GB-5
GB-6
GB-6
GB-6