Bosch ART 24 Notice Originale page 18

18 | English
When transporting, switch the
u
garden tool off and pull the mains
plug.
Always ensure a safe working posi-
u
tion when working with the trimmer.
Always keep your hands and feet at a
safe distance from rotating parts.
Take care when placing product on
u
floor, as it may become a trip hazard.
Remove the mains plug before repla-
u
cing the spool.
Inspect and maintain the trimmer
u
regularly.
Always wear gloves when cleaning
u
product or replacing cutting means.
Be careful of injuries from the blade
u
used for cutting the cutting line.
After feeding cutting line, always re-
turn the trimmer to a horizontal
working position before switching
on.
Switch the garden tool off and remove
the plug from the socket:
– whenever you leave the machine
unattended for any period of time
– before replacing the cutting line
– if the cable is tangled,
– before cleaning or working on the
trimmer
– before storing the trimmer
Store the product in a secure, dry
u
place out of the reach of children. Do
not place other objects on top of the
product.
F 016 L94 055 | (20.02.2020)
Electrical Safety
Switch the machine off and pull
u
the mains plug before actuating
the manual-feed button. This but-
ton should only be used in the
event of an obstruction of the cut-
ting line.
Warning! Switch the
product off and pull the
mains plug before any main-
tenance or cleaning. The same ap-
plies when the mains cable is dam-
aged, cut or entangled.
Your product is double insulated for
safety and requires no earth connec-
tion. The operating voltage is 230 V
AC, 50 Hz (for non-EU countries
220 V, 240 V as applicable). Contact
your Bosch Service Centre for details.
If in doubt contact a qualified electri-
cian or the nearest Bosch Service
Centre.
For increased electrical safety use a
Residual Current Device (RCD) with a
tripping current of not more than
30 mA. Always check your RCD every
time you use it.
Keep the supply cables away from
moving hazardous parts and avoid
damage to the cables; this can lead to
contact with live parts.
The connections (plugs and sockets)
should be kept dry and off the ground.
The supply cables must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
Bosch Power Tools