Button Functions; Backlight - Ralston Instruments LC30 Guide De Démarrage Rapide

Button Functions

Fonctions des touches................47
Funciones del botón ......................48
按鍵功能 .....................................49
Функции кнопок .........................49
EN
Power
Hi/Low/
Reset
Menu
Zero
Pressure

Backlight

46
• Press and hold to turn on.
• When LC30 is on, press and hold to turn off.
Note: LC30 power is set to stay on when turned on.
If power is lost, then the LC30 will run on battery
power.
• Press button once to display highest pressure or
temperature reached.
• Press button again to display lowest pressure or
temperature reached.
• Press and hold button again to clear high and low
values.
• Hi/Low/Reset applies to the Active Sensor. If there
are 2 sensors, then change sensors to use Hi/Low/
Reset for the other sensor.
• If 2 sensors, quick press to change sensors.
• Long press initiates MENU and follow prompts.
• With no pressure applied, press and hold button
to zero reading.
Note: If pressure is greater than 10% of gauge
pressure range, then a message to vent the pressure
will appear.
• Press button to illuminate backlight.
Note: Light will turn off after a set time. Both time
and brightness can be adjusted in FieldLab Desktop
software.
Função dos botões ......................... 51
Funzioni dei pulsanti ...................52
Tastenfunktionen ........................53