Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION - General information
The appliance is intended only for domestic use, not for professional use.
1
7
1. Housing
2a. Power indicator light (red)
2b. Ready-to-use light (green)
3. Fastening clip
OPERATION - Before first use
1.
Remove the packaging.
2.
Clean all the baking plates to remove any residues that may be left from the manufacturing process
(see "Cleaning and maintenance").
3.
Put the plug into the wall socket and allow the grill to heat up for 10 minutes. This will remove any
packaging odor from the appliance.
WARNING:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal and will stop on its own. Make sure the appliance has sufficient ventilation.
•
During use the heating element will switch on and off to keep the temperature of the baking plates
constant. Consequently, the temperature pilot light will also occasionally be illuminated.
•
Keep house birds away from the appliance when it is in use. Fumes released from the non-stick
coating are harmful to birds.
OPERATION - Changing the baking plates
1.
Allow the appliance to cool down
completely.
2.
Open the appliance.
3.
Push the black knobs next to the handle
to remove the baking plates (see figure 2A).
4.
Take a different baking plate.
5.
Place the long recess of the baking plate
in the opening under the hinge of the
appliance (see figure 2B). Carefully push
the baking plate down until it clicks into
place (see figure 2C).
6.
Repeat steps 3 to 5 for the second baking
plate.
2a
2b
3
25
4. Baking plate for waffles (x2)
5. Baking plate for toasted sandwiches (x2)
6. Baking plate for grilling (x2)
7. Power cord and plug
A
A
EN
4
5
6
B
C
C
A
Publicité
Table des Matières
