Trouble-Shooting - STERWINS 150C EPW.3 Mentions Légales & Consignes De Sécurité

9. TROUBLE-SHOOTING

1) No power.
•
•
2) The high pressure washer operates intermittently.
•
•
•
•
3) No or only little pressure is built up.
•
•
•
4) Great pressure varieties.
•
•
5) Machine pulsating
•
•
•
•
6) Machine is leaking.
•
EN
Check the plug socket, cable, line and plug, where appropriate, have repaired
through electrical specialist.
Any of the parts are defective, such as On/Off switch /motor etc. (please contact
service agent).
Power cable is damaged.
Internal loose electrical connection.
On/Off switch defective(please contact service agent).
Nozzle is clogged. Clean dirty from the nozzle opening using the nozzle cleaner
provided .
Check if there is any air in the system, if so, please ventilate the machine! Run the
machine without the high-pressure hose connected until water starts leaking
without bubbles. Re-attach the high-pressure hose.
Check all inlet pipes leading to the pump for leaks or clogs.
Check the setting on the hand-held spray gun.
Clean the high pressure jet nozzle
Check the water inlet pressure.
Check if there is any air in the hose or pump,allow machine to run with open
trigger until regular working pressure resumes.
Check if there isinadequate supply of mains water,avoid using long, thin hoses(min
1/2").
Check if nozzle partially blocked or water filter blocked,clean the nozzle or filter.
Check if the hose kinked,straighten out hose.
Please contact the authorized agent.
148