Troubleshooting - STERWINS 160HR EPW.3 Mentions Légales & Consignes De Sécurité

9. TROUBLESHOOTING

1)
•
•
2)
•
•
•
•
3)
•
•
•
4)
•
•
5)
•
•
•
•
6)
•
EN
No power.
Check the plug socket, cable, line and plug, where appropriate, have repaired
through electrical specialist.
Any of the parts are defective, such as On/Off switch /motor etc. (please contact
service agent).
The high pressure washer operates intermittently.
Power cable is damaged.
Internal loose electrical connection.
On/Off switch defective(please contact service agent).
Nozzle is clogged.Clean dirty from the nozzle opening using the nozzle cleaner
provided .
No or only little pressure is built up.
Check if there is any air in the system, if so, please ventilate the machine! Run the
machine without the high-pressure hose connected until water starts leaking
without bubbles. Re-attach the high-pressure hose.
Check all inlet pipes leading to the pump for leaks or clogs.
Check the setting on the hand-held spray gun.
Great pressure varieties.
Clean the high pressure jet nozzle
Check the water inlet pressure.
Machine pulsating
Check if there is any air in the hose or pump, allow machine to run with open
trigger until regular working pressure resumes.
Check if there is inadequate supply of mains water, avoid using long, thin
hoses(min 1/2'').
Check if nozzle partially blocked or water filter blocked, clean the nozzle or filter.
Check if the hose kinked, straighten out hose.
Machine is leaking.
Please contact the authorized agent.
148