Publicité
Les langues disponibles
Les langues disponibles
Using the product
To ensure correct readings, repeat the measurement at several
points. Always measure wood moisture across the grain.
Switching t t he i i nstrument o o n:
Press
.
- Measuring mode is opened.
Switching t t he d d isplay l l ight o o n:
The instrument is switched on.
Press
.
- The display light goes out automatically if no key is
pressed for 10 seconds.
Setting t t he m m aterial c c haracteristic c c urve:
The material moisture is indicated in the top line of the
display. The material symbol
material) is displayed with the relevant material number (see
enclosed sticker for the inside of the protective cap).
Settable materials
· 1. beech, spruce, larch, birch, cherry, walnut
· 2. oak, pine, maple, ash-tree, douglas fir, meranti
· 3. cement screed, concrete, plaster
· 4. anhydrite screed
· 5. cement mortar
· 6. lime mortar
· 7. bricks
Press
several times until the desired material
characteristic curve appears.
Testing t t he i i nstrument f f unction:
1 Press
several times until
2 Connect sensing electrodes with the contacts of the test
resistor on the top of the protection cap.
Test
-
flashes.
Test: ok
-
Test: ok
'Tips and assistance'.
3 Press
back to measurement menu.
lights up: instrument is functioning.
does not light up: test not possible, see chapter
Using the product 15
(wood) or
Test:
lights up.
(building
Publicité
