Publicité
Les langues disponibles
Les langues disponibles
Change Main Burner Valve Orifices
1.
Remove the grates and flame tamers.
2.
Remove the cotter pin that hold the burner in place.
3.
Use a flathead screwdriver to remove burner pin cover,
then remove the burner on the front wall of fire box.
4.
Remove the burner from the grill by lifting the burner out.
5.
Use a 6 mm socket and wrench or 6 mm nut driver to
remove the brass orifice from the end of the gas valve.
Replace with the Natural gas orifice.
IMPORTANT: Check that the orifice is properly
installed inside of the burner opening.
6.
Reinsert the burner and reattach using the cotter pin
previously removed. Repeat the procedure for each main
burner.
7.
Reinstall the igniters onto the burners ensuring that they
are 1/8" / 3.2 mm away from each burner.
13
Publicité
Chapitres
Dépannage
