Danby DAG016A1BDB Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the screw hole covers from the upper left
side of the cabinet. Remove the hinge cover and
the upper hinge from the upper right side of the
cabinet.
2. Remove the door from the cabinet. Remove the
hinge hole cover from the top left side of the
door and place it in the hinge hole on the top
right side of the door.
3. Remove the solid foot from the bottom left side
of the cabinet. Remove the adjustable foot and
lower hinge from the bottom right side of the
cabinet. Install the solid foot on the bottom right
side of the cabinet. Install the lower hinge and
adjustable foot on the lower left side of the
cabinet.
4. Install the door. Install the upper hinge and
hinge cover on the upper left side of the cabinet.
Before tightening the screws in the upper hinge,
ensure that the top of the door is level with the
top of the cabinet and that the rubber gasket is
making a good seal with the cabinet all the way
around. Install the screw hole covers in the holes
on the upper right side of the cabinet.
1
2
3
4
5