Table des Matières
Publicité
Elektrischer Anschluss
Connections Provided by the Customer at Connection Plate MST5
Actuator with AC Synchronous Motor
Terminal 1:
Terminal 2:
Terminal 14:
Terminal 13:
Terminal 4:
Termina 3:
Terminal 12:
Electrical Connection
Holds the protective conductor whitch is used -as indicated by the
name- for protective function only. All conductive parts are
thereby connected to ground.
Holds the neutral conductor to provide for current flow, if
necessary.
A voltage applied to this terminal initiates a rotation of the drice in
positive direction (clockwise, seen from the lid). When actuated by
the switching cam, micro switch S1 terminates the rotation (the
actuator stops). Disconnecting voltage to terminal 14 also stops the
rotation.
A voltage applied to this terminal initiates a rotation of the drive in
negative direction (anticlockwise, seen from the lid). When
actuated by the switching cam, micro switch S2 terminates the
rotation (the actuator stops). Disconnecting voltage to terminal 13
also stops the rotation.
WARNING
It is not possible to have, at one time, voltage applied
to both terminals 2 and 3!
If switches S1 is actuated and voltage applied to terminal no. 14,
terminal 4 provides a voltage which can be used for control
purposes
If switch S2 is actuated and voltage applied to terminal no. 13,
terminal 5 provides a voltage which can be used for control
purposes.
L1 manual, attached at this terminal a tension can the drive by
means of the two tracers on the plate be proceeded by hand
(optionally)
Kap. 4
Raccordement électrique
Publicité
Table des Matières
