A&D Medical UC-351PBT-Ci Mode D'emploi page 14

Scale Communication
This scale is equipped with a Continua certified Bluetooth wireless communication function.
Measurement data can be transmitted by connecting to a Bluetooth device that is compatible with
Continua connection specifications.
Devices that are Continua certified carry the Continua logo mark.
Bluetooth devices carry the Bluetooth logo mark.
 For details on pairing this scale with a receiver that is equipped with Bluetooth, see "Registering with
a Receiver (Pairing) (P.6)".
Also refer to the pairing instruction manual of the receiver that you want to pair with.
Ensuring a Good Connection
 Ensure the space between this scale and the receiver is unobstructed. The communication distance
may be shortened due to the building construction or other obstructions. In particular, communication
may not be possible through reinforced concrete walls, etc.
 Do not use the Bluetooth connection near a wireless LAN or other wireless equipment, near devices
that emit electro-magnetic waves such as microwave ovens, locations that have a large number of
obstructions, or other poor environments for radio waves. It may cause the connection to be
frequently interrupted, communication speeds to drop substantially, and errors to occur.
 When used near an IEEE802.11g/b/n wireless LAN device, the devices cause mutual radio wave
interference, and the communication speed may drop or connection may be impossible. In this
situation, turn the power of the device that you are not using off, or change the location where it is
used.
 If the scale does not communicate properly when used near a wireless device or broadcast station,
change the location where it is used.
 The communication distance between this scale and the receiver depends on the Bluetooth output
class of the receiver.
For Class1 Bluetooth receivers: Max. 100 m
For Class2 Bluetooth receivers: Max. 10 m
This distance may become shorter due to the surrounding environment; therefore check that the
distance is close enough for data to be transmitted after the measurement.
Time Settings
This scale has a built-in clock. The date and time of measurement are included in the measurement data.
The clock is synced with the clock in the receiver. For details on the clock specifications, see the
instruction manual of the receiver.
Caution
English 11