Locking And Unlocking The Screen; Customising The Home Screen; Changing The Date And Time; Device And Data Management - Crosscall CORE-M4 Mode D'emploi

2. Enable or disable notifications as desired.
Closing the notification panel
Swipe up or press the home button to close the notification panel.

LOCKING AND UNLOCKING THE SCREEN

Locking the screen
• Press the on/off button to manually lock the screen.
• The screen automatically locks and goes into sleep mode after being idle for a period
of time, to reduce power consumption and prevent unintended actions. To change the
screen timeout, go to Settings > Display > Advanced > Sleep, and select a duration.
UNLOCKING THE SCREEN
Press the on/off button to turn the screen back on and swipe in any direction.

CUSTOMISING THE HOME SCREEN

1. Touch and hold an empty area of the screen to access the home screen editor.
2. Select WALLPAPERS and WIDGETS to customise your screen.
3. To delete a widget, press and hold the widget you want to delete. "Remove" will appear
at the top of the screen. Then drag the widget into "remove".

CHANGING THE DATE AND TIME

Go to Settings > System > Date and time.
• Enable Automatic time zone to allow the network time zone.
• Select Use 24-hour format to use the 24-hour clock.

DEVICE AND DATA MANAGEMENT

Data transfer
Do not disconnect the USB cable from the device when transferring data. This could
result in loss of data and/or damage to the device.
1. Using a USB cable, connect your device to a computer.
2. Open the notification panel, then tap Charging this device via USB > Files transfer. Tap
Transfer photos (PTP) if your computer does not support the Media Transfer Protocol
(MTP) format.
3. Transfer the files between your device and your computer. A message will appear on your
computer screen. Follow the instructions on screen to transfer your photos/videos, etc.
54