Velleman CAMTVI8 Mode D'emploi page 4

 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 Keep this device away from extreme heat.
 Protect this device from shocks and abuse. Avoid brute force when
operating the device.
 Only use this device in compliance with privacy laws and
regulations. Refer to the local authorities for more information.
4. Features
 weatherproof
 with B/W night vision (IR LEDs)
 vandal-proof housing
 varifocal lens
5. Overview
Refer to the illustrations on page 2 of this manual.
1 mounting plate
2 fixation ring
3 positioning ring
4 manual zoom
5 lens enclosure (sphere)
6 IR night LEDs
6. Hardware installation
Refer to the illustrations on page 2 of this manual.
1. Choose a location for the camera, keeping following guidelines in
mind:
o do not install the camera in locations where extremely high or
low temperatures or excessive vibrations may occur.
o avoid mounting the camera near high electro-magnetic fields.
o do not aim the camera at the sun or other extremely bright
objects or reflections (e.g. metal doors).
2. Hold the mounting plate [1] and unscrew the fixation ring [2] by
turning it counter-clockwise. Note that the lens enclosure [5] and
positioning ring [3] are also released.
3. Use the mounting plate [1] to determine the position of the
mounting holes. Drill the holes.
V. 02 – 10/02/2016
CAMTVI8/CAMTVI8W
7
8
9
10 cable slot
11 cable
4
varifocal lens
manual focus
light sensor
©Velleman nv