Bluetooth - Tokai LAR-100B Manuel D'utilisation

HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
Instructions for App "icontu" with Car Audio
• Through the smart phone PLAY STORE download software "icontu".
• Install the software on your smartphone: "icontu".
• The smart phones "icontu" can controls CAR RADIO in bluetooth connection.
Note: software "icontu" is generic software, please refer to CAR RADIO functions.
The microphone unit must be connected to the device in order to use the Bluetooth functions. In addition a mobile phone
is required that supports the Bluetooth data transmission.
Connecting the telephone to the device
• Activate the Bluetooth function on your mobile phone and conduct a search for Bluetooth devices. After a successful
search the entry CAR AUDIO appears for the device in the display of the mobile phone.
• Select this entry for the connection and for the subsequent password request enter the password 1234 for the device.
You may possibly have to confirm the connection structure once more.
After a successful coupling CONN OK appears briefly in the device's display.
Call accept/end
With an incoming call you hear the call signal via your mobile phone, whilst in the device's display is shown the call number.
• You accept an incoming call by the "
• You end the call by pressing the "
Rejecting a call
• With an incoming call press the "
To call
• The device and the mobile phone must be connected.
• Dial the telephone number that you want to call from your mobile phone.
• The driver can use the device as hands-free kit.
Caller lists
• Push and hold [SEL] Volume knob to select Call list mode. "Call list" shows on LCD. Press [BD]ENT button to
confirmed.
• Rotate Volume to select "IN CALL" or "OUT CALL" to display. Press [BD]ENT button to confirm.
• Rotate Volume knob to show the call list.
• Call list can shows the last 20 IN or OUT calls.
Note:
• The Call List feature will be activated once the mobile phone is connected with the car radio via Bluetooth.
Telephone book:
You can transfer up to 20 contacts (Telephone book entries) from the connected mobile phone to the device and thus
dial and call the contact from the device.
Notice:
• You cannot transfer via Bluetooth your contacts from your connected mobile to your car radio with APPLE ® phones.
• Details for the transference of the contact via Bluetooth can be obtained from the operating instructions of your mobile
phone.
• Each transferred contact is filed in the memory slot PB01. The contacts that have already been transferred are auto-
matically filed one memory slot further (PB02, etc).
• Push and hold [SEL] Volume knob to select Call list mode. "Call list" shows on LCD. Rotate the volume knob to select
"PH BOOK". Press [BD]ENT button to confirmed.
• Rotate the Volume knob to appears the name and number (PB01-PB20).
• Press the " " button on the device to select the dialled call number.
Deleting the caller lists and telephone book entries
When the mobile phone's bluetooth was connected with device, press [MD] button repeatedly to select "BT mode".
Press and hold the "
mobile phone is severed and all telephone book entries and caller lists on the device are deleted.
Audio streaming (A2DP)
The device uses the A2DP profile (Advanced Audio Distribution Profile) and therefore can playback your mobile phone's
audio data.
• Select an audio file from your mobile phone and start the playback.
In the device's display appears the entry A2DP and the audio data will be played back via the speakers connected to
the device.

5. BLUETOOTH

" button on the device.
" button on the device.
" button on the device to reject the call.
" button on the device until RESET appears in the display. The Bluetooth connection to the
EN-21