Tokai LAR-100B Manuel D'utilisation page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14. LCD DISPLAY
The Liquid Crystal Display will display the current state of the unit.
15. PANEL RELEASE BUTTON
Press
button and the front panel will detached.
MP3/WMA CONTROL
16. PAUSE BUTTON
During "PLAY", press (16) 'PAU' button to "PAUSE". Press it again to resume play.
TRACK/SEARCH BUTTON (11)
FORWARD AND REVERSE TRACK SEARCH (or changing songs)
Press the SKIP button (
....REVERSE
Press and hold the SKIP button (
of the disk is found, release the button. Normal play will resume.
17. REPEAT BUTTON
When this button is pressed, 'RPT' indication is displayed and play of the selected track will be continually repeated until
the Track repeat mode is cancelled by pressing 'RPT' button again.
18. INTRO BUTTON (Preview all Tracks)
When this button is pressed, 'INT' indication is displayed and the first several seconds of each track of the disk are
played. Press again to stop intro and listen to track.
19. RANDOM BUTTON
When this button is pressed, 'RDM' indication is displayed and each track of the disk are played in random instead
of normal progression. To cancel RANDOM mode, press 'RDM' button again.
20, 21. FOLDER DOWN/UP (In case of MP3/WMA files)
M5: Folder down / M6: Folder up
Connecting it to Portable MP3 Player
22. FRONT AUX IN
Convenient easy to use front "AUX IN" input jack, allows easy connection of Portable Media and digital MP3 Players.
23, 24. USB PORT / SD MEMORY CARD
The device is equipped with a USB interface and a memory card reader for SD cards. MP3 or WMA files stored on
these media can be played.
1. Plug your USB storage medium into the USB port.
Note: A USB cable is used for the connection between the headunit and the external device such as Smart-phone
or Tablet during charging mode.
2. If you use a memory card, insert it into the memory card reader.
3. The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio files on how to control USB or memory card playback.
Note:
• Due to the great variety of devices with USB and SD card interfaces that sometimes have manufacturer-specific
functions, we cannot guarantee that all media will be recognized and that all operational functions will be avail-
able with this device.
• You cannot operate USB hard drives on the device.
or
) during play to go to the desired track(song).
....FORWARD
or
) during play to scan the disk at high speed. When the desired music section
EN-20

Publicité

Table des Matières
loading

Table des Matières