Dvd/Vcd Video Operation - Jensen VM9021TS Guide D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

VM9021TS

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking brake is
applied. If you attempt to play a DVD while the vehicle is
moving, the TFT screen displays "PARKING" with a blue
background. Rear video screens, if applicable, will operate
normally.
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the OPEN button (12).
The unit beeps and then opens.
Closing the TFT Screen
Press the OPEN button (12) again to close the TFT screen.
Insert/Eject Disc
Upon inserting a DVD disc, DVD mode is entered and disc
play begins.
NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see
"RATING (Parental Lock) Menu" on page 26).
You cannot insert a disc if there is already a disc in the unit or
if the power is off.
NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.
Ejecting a Disc
Press the
button (22) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.
Reset the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the
button (22) on the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted,
press the DVD button (18) on the front panel or remote
control (8) until "DVD" appears at the bottom of the screen.
Using the Touch-Screen Controls
The touch key areas for DVD playback are outlined below.
A – Return to MAIN MENU
B – DISP key: Displays playing information
C – Select previous chapter
D – Select next chapter
E – Display the following on-screen controls: Menu,
|<<, >>|, <<, >>.
Controlling Playback
Stopping Playback
Touch the stop button ( ) on the screen or press the
BAND button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (
) on the screen or press the
>/||
button on the remote control (18) to suspend or resume
>/||
disc play.
Slow Motion Playback
Press the
button (22) on the remote control or the V button
<<
(19) on the joystick to play the current title in slow motion at 1/
2, 1/4, 1/6 or 1/7, the normal speed. Press
normal play. Continue pressing the << or V button to slow
reverse.
Repeat Playback
Press the REPT button (7) on the remote control to alter
repeat mode according to the following:
• DVD: Repeat Title, Repeat Chapter, Repeat Off
• VCD (PBC Off): Repeat Single, Repeat Off
• MP3: Repeat Single, Repeat Folder, Repeat Off
21
NOTE: For VCD play, the repeat function is not available
if PBC is on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area of a disc to
repeat.
• Press the REPT A-B button (6) on the remote control to
set the start point (A) of the repeated section.
• Press the REPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat continuously.
• Press the REPT A-B button again to cancel the A-B
section setting and stop repeat play.
Random Playback
With a DVD, VCD, or CD playing, press the RDM button (33)
on the remote control to activate random playback and play
all chapters/tracks in random order. "On" appears on the
screen.
Press the >>| button (19) on the remote control or the >
button on the joystick (9) to play the next random track.
,
>/||,
Press the RDM button again to turn random play off.
NOTE: When a VCD is playing with PBC turned "On",
activating random playback automatically turns PBC off.
/
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the
main DVD menu. Use the directional (arrow) buttons (<, >, /\
& V) on the joystick (8, 9, 6, 7) to select a title from the menu.
Press the TITLE button (2) on the remote control to select a
different title for playback.
Press the
button (18) on the remote control or the ENTER
>/||
(joystick) button (5) to confirm your selection and begin
(18) to resume
>/||
playback.
Moving Through Chapters
Press the >>| button (19) on the remote control or the >
button on the joystick (9) to advance to the next chapter on
the DVD.
Press the |<< button (17) on the remote control or the <
button on the joystick (8) to move to the previous chapter.
Fast Forward/Fast Reverse
Press the >> button (14) on the remote control or the /\ button
(6) on the joystick to fast forward. Keep pressing and

Publicité

Table des Matières
loading

Table des Matières