Using The Tända Clear Light Therapy Treatment; Using The Goggles - Tanda Clear Mode D'emploi

USING THE TÄNDA CLEAR ACNE
LIGHT THERAPY TREATMENT
1. Cleanse your skin
2. Apply the Tända Clear Pre-Treatment Gel to affected
areas (avoid the eyes).
3. Press the orange power button (5) once.
4. When the indicator light (6) is flashing green, the
device is ready to begin a treatment.
5. Place the Tända Clear device in contact with your
skin (the light will only activate when the treatment
head is in direct contact with the skin).
6. The light treatment head operates in three-minute
cycles. An audible beep will sound every
30 seconds. Two quick beeps will indicate when
the cycle is complete.
7. Treat for three minutes over each affected area,
twice daily. Results may be seen in as little as
24 hours, for best results use every day to prevent
further outbreaks.
8. Store the device in its recharging stand.

USING THE GOGGLES

The goggles have been provided for your conve-
nience and comfort as some people find the light
bright. Company sponsored testing showed that,
when used as directed, the device did not pose risk
of damage to the eyes.
• Position the goggles over your eyes
• Tie the elastic band so that the goggles fit
comfortably around your head.
Note: Do not shine light source directly into the eyes.
4